Tools and work stands for Aprilia Ducati Bimota MuZ Laverda motorcycles from European Cycle Specialties

40-600 Valve Shim Tool Kit
Includes our valve shim measuring tool, a 1" micrometer and 6" dial calipers

40-FWS Front Work Stand
Comes with 17mm pin which fits all Ducatis with hole in steering stem. Other pin sizes available

40-WS Rear Work Stand.
Quick and easy lift! Fits most 2-sided swing arm bikes including all Ducati twins. Adjusts from 8.75" to 13" width
Available soon to fit the new 749 and 999!

40-916WS 916/748 Rear Work Stand. Quick and easy lift! With an easy pin change, it will fit most single-sided swing arm bikes.
40-FWS2 Front Work Stand fits all late model Ducatis and many other bikes with holes in the bottom of fork legs.

40-601 ECS Ride Height Tool
for Ducati 748/916/996 Used to accurately set up the suspension on your Ducati 748/916/996s Attaches to existing holes in the frame.

40-602 Front axle drift.
Keep from destroying your front axle when removing it. Fits 748/916/996 ST2 ST4 MH900E , late model monsters and 900SS.

	Part 40-4VSK - 7mm Valve Shim Kit for Ducati 2, 3 & 4 valve Desmo's Save your valuable time and frustration- no running around trying to find the shims that you need. Saves over 50% off the price of factory shims! Works on 2, 3 & 4-valve Ducati's with 7mm valves, Including 748,749,848, 851,888, 916, 996, 998, 999, 1098 Monster S4,S4R, ST3, ST4, ST4S and all 2007 and newer 2 valve motors. The only exceptions are the 749S, 749R, 996S, 996R, 999R, 1098R. Comes with shim measuring tool. Small kit has 36 shims, Large kit has 52 shims. 40-2vsk Price: $339.00 Sale Price: $329.00 Select a Size Enter quantity to cart
	< Part 40-2VSK - 8mm 2 Valve Shim Kit for most Ducati 2valve Desmo's Save your valuable time and frustration- no running around trying to find the shim that you need. Saves over 50% off the price of factory shims! Works on most 2-valve Ducati's, Including 620S,750SS,900SS, 620,750, 800 900 Monster, ST2 and early bevel drive Ducati's. The 1000DS Multistrada, Hypermotard and 2007 & newer models require the 7mm kit. Comes with a easy to use shim measuring tool. Click here for more information ECS 2Valve Shim Kit40-2vsk Price: $299.00 Enter quantity to cart
	40-CT Crank Turning Tool Makes turning the motor over while adjusting your valves a snap. Save time adjusting valves and degreeing cam shafts. $69.95
	Cylinder Head Wrench 887130768 900ss 750paso fits 15mm and 14mm nuts 887130718 fits 17mm and 16mm nuts
	Rocker Arm Extractors 887130120 2-valve Ducatis 887130130 4-valve Ducatis
	887130748 Cam Belt Tensioner for 2 valve Ducatis
	887130143 Closing Rock Arm Installing tool
	887130882 Cylinder Head Wrench 15mm. M900 916
	887130144 Timing Cover Puller For 2 & 4 valve belt drive Ducatis
	53-MTK Tool kit w/bag Upgrade your tool kit with this quality set.
	TORX-1 Torx bit set to fit most screw drivers with changeable hex bits. Sizes t5,6,7,8,9,10,15.
	Service Manuals
How to use our shim tool for measuring your shims.	40-ST Valve Shim Tool Makes the measuring of Ducati closing shims easy on both 2 valve and 4 valve Desmo models. Faster and easier to use then the factory tools. Save $60.00 over the 4 Ducati factory tools required for the same jobs!
European Cycle Specialties 13862 A Better Way #8B Garden Grove, CA 92843 e-mail ECSducati@aol.com Cell 714-791-8900 Copyright©1996-2010 European Cycle Specialties

Bimota,Ducati,Laverda,MuZ,Tools,motorcycles,Monster,ST2,ST4,748,916,M750,M900,900SS,900CR,900SP,ECS,European Cycle Specialties

Copyright©1996-2010 European Cycle Specialties